Immibis’s Peripherals Mod 1.7.10
Immibis’s Peripherals Mod 1.7.10 is one thing to set up ideal away. This mod comes having a handful of cool new blocks and keys/suggests of entry and much more.
An RFID card is an item that can hold up to 80 characters of data. If you are holding one anywhere in your inventory, it can be read by any computer with a connected RFID reader within 5 metres.
They can only be written once, and writers are quite expensive and slow, though readers are not.
This block reads RFID cards held by players within 5 metres. It has no GUI and can only be used from Lua code.
It can also read RFID cards inside storage carts (within 5 metres)
No card inserted:
Blank card inserted:
Non-blank card inserted:
(the red line shows progress)
Right click with a RFID card in your hand to insert the card.
Right click with an empty hand to remove the card, if there is one in the writer. You cannot remove the card unless the glass cover is completely open.
RFID card recipe:
You can also craft a card with any dye to change the colour of the white tab – this is purely visual and doesn’t affect anything else.
RFID reader recipe:
RFID writer recipe:
Mag-cards (magnetic stripe cards) are similar to RFID cards, but they are rewritable, store slightly more data (100 chars instead of 80) and require physical contact with the machine to read or write. They’re also written and read with the same device, which is cheaper than an RFID reader and much cheaper than an RFID writer.
This is a peripheral that reads and writes mag-cards.
Right click while holding a mag-card to swipe it.
The green light shows whether the device is attached to a computer.
The yellow light shows whether the device will write (on) or read (off) the next card swiped.
The orange light is controlled through the API, and is intended to indicate that the computer is waiting for you to swipe a card.
Like with RFID cards, you can craft a card with any dye to change the colour of the background.
Mag-card device recipe:
This is a peripheral that plays square waves.
Despite the name, these will work over any distance – even through unloaded chunks.
Network data is stored in <your world=”” folder=””>/data/immibis’s-peripherals-networks.dat – if you delete this, you’ll need to break and replace every cable and modem before they’ll work again.
This peripheral is the interface between a network and a computer. It must be placed on the side of a block, but will stay even if that block is removed – this allows it to be used with turtles.
This is the cable you can use to connect modems together.
This uses blue wool, not lapis blocks!
LAN messages are strings, similar to rednet.
Each modem can send a maximum of 10 messages per second, regardless of size, and stores up to 25 unsent messages – if you try to send more, you will receive a “Buffer full” error.
Each LAN message is addressed to a channel.
There are 128 channels which any computer can listen to, numbered from 1 to 128 (“positive channels”).
By default, a computer listens to channel 1, and no other positive channels.
Channel numbers can also be below 1 (“negative channels”). If a message is addressed to a negative channel, it is received by the computer with that ID (eg, messages addressed to -5 will be received by computer 5) and also to any modems that are in “promiscuous mode,” which can be set using a peripheral function.
LAN messages also carry a sender ID. Sender IDs can be faked, unless disabled in the config.
This peripheral allows your programs to easily encrypt and decrypt things.
If you’d rather people have to write their own encryption programs, you can easily disable the recipe in the config.
The middle slot must have 64 items. All 64 will be consumed.
This recipe will not work with automatic crafting devices.
This is a completely normal recipe that works with all crafting devices.
How to install Immibis’s Peripherals Mod 1.7.10:
- Download and install Minecraft Forge
- Download and install Immibis Core
- Download and install ComputerCraft Mod
- Download Immibis’s Peripherals Mod
- Click on the Start Menu in Windows.
- Type run into the search box, and select the Run program at the top of the results.
- Type %appdata% into the Run program, and press Enter.
- Go to .minecraft/mods folder.
- Drag and drop the downloaded jar (zip) file into that.
- Enjoy the mod.
Immibis’s Peripherals Mod 1.7.10 Download Links:
For Minecraft 1.5.1
For Minecraft 1.4.7
For Minecraft 1.5.2
For Minecraft 1.6.2
For Minecraft 1.6.4
For Minecraft 1.7.10